Tag Archives: wood

Photo Transfer Project (step-by-step)

img_5684
Preserve your memories by transferring your favorite photos to boards…then add vinyl lettering to complete the project.

This project is not difficult, but it does require several hours of drying time.

SUPPLIES NEEDED

  • Board (I used this DIY board from Uppercase Living)
  • White craft paint
  • Foam brush (for paint, gesso and ModPodge…I rinsed out brush between uses)
  • Gesso gel medium (I used one that I found at Michaels)
  • Rag
  • Disposable bowls (for paint, gesso and ModPodge)
  • Photo printed out on regular printer paper from a laser printer with the image mirrored
  • Vinyl lettering (I used this love expression from Uppercase Living)
  • Burnishing tool (plastic…like an Uppercase Living transfer tool or Pampered Chef scraper or a library card)
img_9842
The supplies you’ll need: board, paint, brush, gesso, rag, disposable bowls, photo from laser printer (printed in reverse), vinyl lettering, burnishing tool.

STEP ONE

Paint your board with white craft paint and allow to dry completely.

STEP TWO

Print out your photo on regular printer paper. You must use a laser printer (not an InkJet). When you transfer your image, it will be mirrored. Therefore, if you want your completed project to look like your original photo, simply mirror the photo before printing by using the “flip horizontal” choice in your tools menu. Size the photo to fit your surface. (You can cut it to size at this point or trim off the excess after you’ve applied the photo to your board.)

STEP THREE

Paint the top surface of your board with gesso. Paint the front of your photo with gesso. Apply the photo to the board with the photo side facing down. Carefully smooth out any bubbles using your burnishing tool. Wipe away any excess gesso. Allow to dry for at least four hours.

img_9843
Paint the front of your board and the front of your picture with gesso.

STEP FOUR

After at least four hours have passed, take a warm damp rag and lay it on top off the board. Leave it on for about five minutes.

STEP FIVE

Remove the rag. Using your fingers dipped in water, make small circular motions on the board to remove the top layer of paper, almost as if you are sandpapering the surface.

img_9789
Dip your fingers in water and rub in a circular motion to remove the top layer of paper.

It’s a little messy. 🙂 Continue to do this until the cloudiness disappears. (I did several rounds, letting it dry in between.)

STEP SIX

When you’ve removed the top layer of paper and the project is completely dry, apply a coat of ModPodge to the front of the photo/board. Repeat two times, letting dry about 15 minutes between coats.

img_9794
When you’ve removed the layer of paper, allow to dry then apply ModPodge.

STEP SEVEN

It’s vinyl time! Choose an expression from Uppercase Living like the one here or custom design your own using the MyDesign Tool (choosing your font, size and color). You could customize the place and date for your photo (such as “Cape Cod 2016”).

img_9797
Position vinyl expression.
img_9798
Remove backing paper from vinyl expression, adhere to surface, then remove transfer tape.

Need tips on applying vinyl? Check out my post with how-to videos.

img_5689
Enjoy.

For more vinyl expression inspiration, please visit http://beth.uppercaseliving.net

Advertisements

Spring Block Project

I know it’s snowing, but we can still think spring, can’t we?

Positive Walls with Beth Golik

Materials:

· “Spring” vinyl expression in Bright White (item #17320 from Uppercase Living®)

· Sandpaper

· Craft paint in spring colors

· Wood blocks (cut from scrap wood, select pine or MDF board). Shown here, 3.5” select pine board from Home Depot cut as follows:

  • 3.5” x 2.5” – two needed (p and g)
  • 1.75” x 3” – one needed (i)
  • 1.75” x 5.25” – one needed (s)
  • 1.75” x 8.5” – one needed (branch)
  • 2” x 2” – one needed (r)
  • 3” x 3” – one needed (n)
  • 3” x 2” – one needed (bird)

Image

Instructions:

· Cut wood according to dimensions listed above

· Smooth edges and surfaces of blocks with sandpaper; wipe clean

· Paint blocks according to picture (or choose your own color combo)

· When paint has dried, cut vinyl pieces and apply to individual blocks. (To apply vinyl, remove backing paper, apply sticky side to block surface, smooth with…

View original post 8 more words

Nativity Scene – DIY Project

‘Tis the Season for making handcrafted projects…perfect for gift-giving or for your own seasonal display. I like to do this project with friends — and even with MOPS (Mothers of Preschoolers) groups. Combine the making of this Nativity Blocks project with the reading of the Christmas story (and maybe throw in a little Christmas cookie eating), and you have the perfect gathering this season.

Nativity Blocks

You’ll need the following materials:

Vinyl expression #19904 from Uppercase Living in your color choice (whipped creme shown here)

Blocks cut to the following specs, painted in your color choice.

Nativity Blocks

Click here for the how-to video.

Enjoy!

Nativity Blocks 2013

 

Spring Block Project

Materials:

· “Spring” vinyl expression in Bright White (item #17320 from Uppercase Living®)

· Sandpaper

· Craft paint in spring colors

· Wood blocks (cut from scrap wood, select pine or MDF board). Shown here, 3.5” select pine board from Home Depot cut as follows:

  • 3.5” x 2.5” – two needed (p and g)
  • 1.75” x 3” – one needed (i)
  • 1.75” x 5.25” – one needed (s)
  • 1.75” x 8.5” – one needed (branch)
  • 2” x 2” – one needed (r)
  • 3” x 3” – one needed (n)
  • 3” x 2” – one needed (bird)

Image

Instructions:

· Cut wood according to dimensions listed above

· Smooth edges and surfaces of blocks with sandpaper; wipe clean

· Paint blocks according to picture (or choose your own color combo)

· When paint has dried, cut vinyl pieces and apply to individual blocks. (To apply vinyl, remove backing paper, apply sticky side to block surface, smooth with fingers or burnishing tool, carefully remove transfer tape).